How to Sharpen Hedge Trimmer with Dremel?

How to Sharpen Hedge Trimmer with Dremel

Hedge trimmer blades are the most important and essential part of a hedge trimmer. With these blades, the hedge trimmer would have no use. Thus, in order to keep the hedge trimmer maintained and working, it is crucial to make sure the blades are sharpened at all times.

Furthermore, these blades can be sharpened using many different methods. Nevertheless, the goal of all these methods is the same: To make sure that the hedge trimmer works efficiently and successfully cuts shrubs and trees.

Moreover, the different methods in which this can be done involve using files, sharpening stones and machines. In addition, one of the machines that are easy to use and works efficiently is Dremel. Also, even the best hedge trimmers can be sharpened with this tool.

In this article, you will be able to learn how to sharpen hedge trimmer with Dremel.

What is Dremel?

Dremel is an American brand which manufactured power tools and machinery. It is primarily known worldwide for its rotatory tools. Additionally, these tools are used mostly for metalwork.

One of the rotatory tools can be used to sharpen hedge trimmer blades. Since Dremel is a trusted brand, it can be said that it is safe to use. To add on, it sharpens the blade of hedge trimmers making it work like new once again.

Steps to use Dremel to Sharpen Hedge Trimmer Blades

Firstly, it is important to choose a Dremel that can be used to sharpen hedge trimmer tools. For an average hedge trimmer, it is important to focus on making sure the Dremel selected is a rotatory tool. Furthermore, it will cost approximately 35 dollars to 45 dollars.

Step 1: Select the correct Dremel that suits the hedge trimmer blades

Moreover, since sharpening a Dremel involves the use of sharp tools, it is essential to make sure that safety is ensured. To begin with, leather gloves are the most effective way to protect your hands from any kind of exposure that may harm them.

However, in place of the leather gloves, rubber gloves can also be a substitute.

Step 2: Gear up with safety tools, clearing out the workspace

Next, it is best to place the hedge trimmer blades in a secure device. If there is no device such as a vice available, you can place the blades on a flat surface. Likewise, this will make it easier to work and also safer. On the contrary, the best option is to use a vice as it is more secure.

Step 3: Secure the object

The next step will be to secure a bit. Further, one must insert the correct bit on the Dremel. At this point, it is important to make sure that the Dremel is not plugged in and/or has its batteries removed. More importantly, using an incorrect bit may cause damage to the hedge trimmer blades. Also, by turning the Dremel off, safety is ensured.

Step 4: Insert bit on Dremel

In continuation, the next step is the most important step. This involves the use of the Dremel to sharpen the blades. To begin with, it is best to start with a slow speed and then move on to high speed; after getting a hang of the Dremel. Also, the direction you are working is should be a downside so that the blades are re-sharpened in the best way possible. Even the best hedge trimmers can be sharpened using this step.

Step 5: Sharpen the blades while making sure the Dremel is moving in the correct direction

Step 6: Repeat step 5 for each tooth

After completing the process, wipe the blade with a rag. This will eliminate any additional bits that are still stuck on your blade. Further, it will also make the hedge trimmer blade smoother and more efficient in the garden.

Step 7: Use a rag to wipe the blade

Take a rag and apply some oil on it to grease it after finishing all of the above. This creates on the blade a protective layer. In addition, this will also prevent rusting of the blade.

Step 8: Apply oil on the sharpened blade with caution

If you secured your hedge trimmer blade on vice, the last step is to remove it from the vice.

Step 9: Remove hedge trimmer blade from vise

Final Verdict

To conclude, it is not a difficult task to sharpen a hedge trimmer blade with Dremel. However, for safety and efficiency reasons, it is best to get this done professionally. For what it’s worth, making a mistake and ruining the entire machine will probably cost more than sending the machine out for servicing.

Therefore, while it might seem like a simple task, it is best that you get technical help for this job. With technical support, it is a guarantee that the work will be done in a professional manner and the job will be done properly.

Another reason is that technical support will make sure no harm is done. Therefore, technical support is the best option in the scenario of using a Dremel.

Click Here to Leave a Comment Below

Leave a Reply: